7. Programmable Features
49
7.2 Basic features
Code #00: Setting the Quick Setup
QUICK SETUP
PRESS SET
See page 19 for details.
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 28 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 29 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 30 for details.
Code #04: Printing a sending report
SENDING REPORT
MODE=ERROR [±]
To print a sending report for fax transmission
results (page 38).
“ERROR” (default): A sending report will be
printed only when fax transmission fails.
“ON”: A sending report will be printed after every
transmission.
“OFF”: Sending reports will not be printed.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=3 [±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “1”, “2”, “3” (default), “4” or “5
EXT.TAM” (External Telephone Answering
Machine).
Code #12: Enabling remote operation for an
answering machine
REMOTE TAM ACT.
MODE=OFF [±]
If you are using the unit with an answering
machine, activate this feature, and program the
remote activation ID. You can access the
answering machine remotely by pressing this ID
to retrieve recorded voice messages.
1. Press {MENU}.
2. Press {#} then {1}{2}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter your ID from 1 to 5 digits, using 0–9,
{*} and {#}.
L The default ID is “11”.
6. Press {SET}.
7. Press {MENU}.
Code #13: Setting the dialing mode
DIALING MODE
MODE=TONE [±]
If you cannot dial, change this setting depending
on your telephone line service.
“TONE” (default): For tone dial service.
“PULSE”: For rotary pulse dial service.
Code #16: Setting the recording paper size
PAPER SIZE
=LETTER [±]
“LETTER” (default): Letter size paper.
“LEGAL”: Legal size paper.
“A4”: A4 size paper.
Code #17: Setting the ringer pattern
RINGER PATTERN
MODE=A [±]
You can select “A” (default), “B” or “C”.
FL611-PFQX2072ZA-en.book Page 49 Thursday, December 21, 2006 11:10 AM