Filter
Top Products
10. Help
51
10 HelpError Messages
10.1 Error messages –
Reports
If a problem occurs during fax transmission or
reception, one of the following messages will be
printed on the sending and journal reports (page
27).
COMMUNICATION ERROR
(Code: 41-72, FF)
L A transmission or reception error occurred.
Try again or check with the other party.
DOCUMENT JAMMED
L The document is jammed. Remove the
jammed document (page 56).
ERROR-NOT YOUR UNIT
(Code: 53, 54, 59, 70)
L A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.
MEMORY FULL
L The document was not received as a result of
the memory being full.
NO DOCUMENT
L The document was not fed into the unit
properly. Re-insert it and try again.
OTHER FAX NOT RESPONDING
L The other party’s fax machine is busy or has
run out of recording paper. Try again.
L The other party’s fax machine rings too many
times. Send the fax manually (page 27).
L The other party’s machine is not a fax
machine. Check with the other party.
L The number you dialled is not in service.
PAPER JAMMED
L The recording paper is jammed. Clear the
jammed paper (page 55).
PAPER OUT
L The unit has run out of recording paper.
Install recording paper (page 6).
L The cover was opened. Close it and try
again.
PRESSED THE STOP KEY
L{STOP} was pressed, and fax transmission
or reception was cancelled.
PRINTER OVERHEATED
L The printer overheated. Let the unit cool
down.
OK
L Fax transmission or reception was
successful.
10.2 Error messages –
Display
If the unit detects a problem, one or more of the
following messages will appear on the display.
—————————————————————
CALL SERVICE 1
CALL SERVICE 2
L There is something wrong with the unit.
Contact our service personnel.
—————————————————————
CHECK COVER
b
OUT OF PAPER
L The cover is open. Close it.
L The unit has run out of recording paper.
Install recording paper (page 6).
—————————————————————
CHECK DOCUMENT
L The document was not fed into the unit
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 57) and try
again.
L Attempted to send a document longer than
600 mm. Press {STOP} to remove the
document. Divide the document into two or
more sheets and try again.
—————————————————————
CHECK MEMORY
L The memory (telephone numbers,
parameters, etc.) has been erased. Re-
program.
—————————————————————
DIRECTORY FULL
L There is no space to store new items in
navigator directory. Erase unnecessary items
(page 19).
—————————————————————
FAX IN MEMORY
L The unit has a document in memory. See the
other displayed message instructions to print
out the document. For fax memory capacity,
see page 60.
FT-901-903-907BX.book Page 51 Monday, March 29, 2004 10:03 AM