Filter
Top Products
-15-
Wireless function preparation
The methods of transferring images using a wireless LAN can be broadly
classified into three types according to the environment you are currently
using.
(1) Firstly, when using the wireless function
Insert an optional ET-CDWL1 series wireless card into a computer, and
use Ad Hoc mode so that the computer can carry out direct wireless
communication with the projector.
Computer Projector
Setting procedure
Set the computer and the projector according to the following procedure.
Preparation & settings Check
communication
Transmit
images
<Projector> <Computer> <Computer> <Computer>
Inserting the
wireless card
(page 28)
Inserting the
wireless
card (page
19)
LAN
settings
(page 22)
Network
settings using
Wireless
Manager
(page 38)
Use Wireless
Manager to
check
communicatio
n with the
projector
(page 41)
Use Wireless
Manager to
transmit the
images (page
42)
Setting example
Setting item Projector LAN
settings
Network settings using
Wireless Manager at
computer
IP ADDRESS 192.168.10.10 (default)
If using two or more
projectors, use different
addresses for each.
Set the address to
something like
192.168.10.11 or
192.168.10.12. Do not
use the same address as
used for the projector.
SUBNET MASK 255.255.255.0 (default) 255.255.255.0
MODE AD HOC Ad Hoc
CHANNEL 11 (default)
Use the same setting
for the computer.
11
Use the same setting for
the projector.