Filter
Top Products
-40-
Wireless LAN
0
00
0 Mode
Set to either “Ad Hoc” mode or
“Infrastructure” mode.
Refer to page 15 of “Wireless
function preparation” while
making this setting.
Note:
• If setting to “Ad Hoc” mode, do
not set to “802.11Ad Hoc”.
1
11
1 SSID
Change the name so that it is the same as the SSID that has been set
for the access point to be used for transmissions in Infrastructure mode.
2
22
2 Channel
Set the channel to be used during Ad Hoc mode. The projector must be
set to the same channel.
3
33
3 READ CURRENT SETTING
Loads the setting values which are currently set for the wireless card.
When all settings have been completed, click “OK”. It may then
be necessary to restart Windows.
After making the settings, do the “Checking communication
with the projector” described on page 41.