Filter
Top Products
-17-
(3) When using an existing access point for
wireless communication
Use the access point to carry out wireless communication between the
computer and the projector in Infrastructure mode. Some access points
may not let you make connections.
Computer Computer Computer
LAN
Computer Access point Projector
Setting procedure
Set the computer and the projector according to the following procedure.
Preparation &
settings
Check communication Transmit
images
<Projector> <Computer> <Computer>
Inserting the
wireless card (page
19)
LAN settings (page
22)
Use Wireless
Manager to check
communication with
the projector (page
41)
Use Wireless
Manager to
transmit the
images (page
42)
Setting example
Setting item Projector LAN settings
IP ADDRESS
SUBNET MASK
Ask your network administrator for details on
settings.
MODE INFRASTRUCURE
CHANNEL Set to the same CHANNEL as the CHANNEL for the
access point. (Ask your network administrator for
details.)
SSID Set to the same SSID as the SSID for the access
point. (Ask your network administrator for details.)
Note:
• If either the projector or computer is out of the range of the access point,
use Ad Hoc mode as described in page 15.