Filter
Top Products
-41-
Checking communication with the
projector
Right-click on the icon in the taskbar, and select
“Search Projector”.
• If communication with the projector is
successful, the host name and IP address for
the projector will appear.
• Select the projector for transmitting the
images to, and then click “OK”.
• If you would like to repeat the search for a
projector, click “SEARCH”.
Note:
• Projector searching cannot be carried out for
approximately 30 seconds after the projector
power is turned on, even if “Search Projector”
is selected.
• If the IP addresses have not been set for projectors and computers within
the same network group, searching may not be carried out correctly.
• If the message “No projector detected.”
appears as shown at right, the projector
and/or computer settings may be incorrect.
Check the settings and then repeat the
search.