Filter
Top Products
135
Relayed Transmission
Sending a Document by Relayed Transmission
Once you have recorded all the necessary parameters in your machine in accordance with the Relay Network
you belong to, you can send a document to two or more stations in the network system, automatically, using
the procedure below.
Set document(s) face down.
FUNCTION
2
Dial by any combination of the following methods:
• One-Touch Dialling
• Abbreviated Dialling
• Directory Search Dialling, press SET after each
station is entered
(For details, see page 46 to 49.)
Ex:
01
START
The document is stored into memory and your machine
starts to dial the number of the Relay Station and sends the
document.
After the Relay Station finishes its transmission to the End
Receiving Stations, your machine prints out a RELAY XMT
RESULT REPORT sent back by the Relay Station.
You cannot use manual number dialling in step 3.
06004000002
06004020005
06004050005
04003060058
#@multitude
06004060020
06004060019
06004060015
Note:
06004070002
ENTER STATION(S)
THEN PRESS START 00%
ENTER STATION(S)
THEN PRESS START
<01>(Station name)
5551234
* STORE * NO.001
PAGES=01 01%
6
1
2
3
4