Filter
Top Products
59
Sending Documents
Redialling
Automatic Redialling
If the line is busy or there is no answer, your machine will redial the
number up to 3 times at 3 minutes interval. During that time, a
message will appear as shown to the right.
A file number is shown at the upper right corner of the display if it
is a memory transmission file.
Manual Redialling
You can also redial the last dialed number manually by pressing the
REDIAL
key.
To redial the last dialed number through memory
Set document(s) face down.
Make sure that the MEMORY lamp is on.
PAUSE/
REDIAL
START
The document is stored into memory with a file number.
Then dials the last dialed number.
To redial the last dialed number through ADF
Set document(s) face down.
MEMORY
Make sure that the lamp goes off.
PAUSE/
REDIAL
Your machine starts to dial the last dialed number.
1. While the unit is displaying ”WAIT TO DIAL”, you can press
REDIAL
to start redialling immediately.
2. While the unit is displaying ”DIALLING” and a message is heard through the monitor that the circuits are
busy....., you can press
REDIAL
to start redialling immediately.
04003000002
04003010007
04003020013
04003050009
04003020014
04003050008
04003990006
04003060070
04003060048
04003060049
04003990007
04003060058
#@multitude
04003060072
#@multitude
04003060069
Note:
04003070027
04003070028
WAIT TO DIAL NO.001
(Telephone number)
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
* STORE * NO.002
PAGES=01 01%
* DIALLING * NO.002
5551234
ENTER STATION(S)
THEN PRESS START 00%
ENTER STATION
00%
TEL. NO.
5551234
* DIALLING *
5551234
4
1
2
3
1
2
3