Filter
Top Products
Setting up
24 -
ENGLISH
Getting Started
Projector location range
■
The setting position can be adjusted within the following range.
See “Projection related” regarding adjustment of the projection screen height (SH) and width (SW). (
page
21)
Projector setting range when the screen position is xed
●
Projector
Vertical center of screen
Center of lens
Screen
Projector setting range
(center of lens)
Shift range of the projection screen when the projector position is xed
●
Projector
Projection position with no lens shift
Shift range for
projection screen
Shift direction Maximum range of adjustment
Horizontal (H) Approximately 26% of the projection screen width (SW)
Vertical (V) Approximately 65% of the projection screen height (SH)
Note
Position the projector directly in front of the screen and move the lens shift lever to the center to obtain the optimum
z
projection image quality.
When the lens shift lever is at the horizontal limit of the shift range, you cannot move the lever to the vertical limit. Likewise,
z
when the lens shift lever is at the vertical limit of the shift range, you cannot move the lever to the horizontal limit.
Shift the lens position within the adjustment range. If you shift the lens position outside the adjustment range, a restriction is
z
imposed on the lens movement to protect the optical components and the focus changes.
If the projected image cannot be t into the screen using the lens shift function alone, adjust the projection angle using the
z
adjustable feet (
page 22), and then correct the keystone distortion using the [KEYSTONE] in the [POSITION] menu.
(
page 58)