Filter
Top Products
[PICTURE] menu
ENGLISH
- 37
Settings
Select [PICTURE] from the main menu of
“Navigating through the menu” (
page
34),
and choose an item from the submenu.
After selecting an item, adjust the image with the
z
▲
▼
buttons.
Remote control
Projector controls
[PICTURE MODE]
You can use these preset parameter settings to
optimize image projection according to image source
or projection environment.
Switch settings Switch settings
The settings change as follows each time the button
is pressed.
[NORMAL]
[DYNAMIC]
[GAME] [SPORTS]
[VIVID CINEMA] [CINEMA1]
[REC709]
[NORMAL] For a general image.
[DYNAMIC]
For viewing at high brightness and
sharpness.
[GAME] For use with games.
[SPORTS] For sports program.
[REC709]
For HDTV standard (ITU-R BT.
709) color temperature 6 500 K at
the default setting of the [PICTURE]
menu items.
[CINEMA1]
Tuned by top Hollywood colorists
for watching a movie with smooth
image quality.
[VIVID
CINEMA]
For use with a high luminance,
clear picture mode.
Note
It may take a few seconds for the picture to stabilize after
z
a picture mode change.
[CONTRAST]
You can adjust the contrast of the colors.
Lower
Higher
Setting range: -64 to +64
z
Attention
Adjust the [BRIGHTNESS] in advance if necessary.
z
[BRIGHTNESS]
You can adjust the dark (black) part of the projected
image.
Darker
Brighter
Setting range: −32 to +32
z
[COLOR]
You can adjust the color saturation of the projected
image.
Lighter
Darker
Setting range: −32 to +32
z
Note
When COMPUTER signal is input, only movie based
z
signals can be adjusted.
Movie based signals are 480i, 576i, 480p, 576p, 720/60p,
z
720/50p, 1 080/60i, 1 080/50i, 1 080/60p, 1 080/50p and
1 080/24p.
[TINT]
You can adjust the skin tone in the projected image.
Less greenish
Less reddish
Setting range: −32 to +32
z
Note
When COMPUTER signal is input, only movie based
z
signals can be adjusted.
Movie based signals are 480i, 576i, 480p, 576p, 720/60p,
z
720/50p, 1 080/60i, 1 080/50i, 1 080/60p, 1 080/50p and
1 080/24p.
[PICTURE] menu