Filter
Top Products
[PICTURE] menu
38 -
ENGLISH
Settings
[COLOR TEMPERATURE]
You can adjust the color temperature if the white
areas of the projected image are bluish or reddish.
Less bluish
Less reddish
Setting range: -6 to +6
z
[SHARPNESS]
With regards to the input signal, adjust video
sharpness using one of [SIMPLE] which adjusts
horizontal direction and vertical direction
simultaneously or [ADVANCED] which adjusts each
individually.
Softer
Sharper
Note
Setting range will vary according to the selected input
z
signal.
[SHARPNESS] can be adjusted using either [SIMPLE] or
z
[ADVANCED]. Both settings cannot be used at the same
time.
Adjusting the [SHARPNESS].
z
(When [SIMPLE] is selected for the
[ADJUSTMENT MODE].)
Press 1)
▲
▼
buttons to select [SIMPLE].
SHARPNESS
ADJUSTMENT MODE
SHARPNESS
H-SHARPNESS
V-SHARPNESS
SIMPLE
0
PICTURE
POSITION
LANGUAGE
OPTION
Select [SHARPNESS] with the ▲▼ 2)
buttons, and adjust with the
▲
▼
buttons.
Adjusting the [SHARPNESS].
z
(When [ADVANCED] is selected for the
[ADJUSTMENT MODE].)
Press the ◄► buttons to select 1)
[ADVANCED].
SHARPNESS
ADJUSTMENT MODE
SHARPNESS
H-SHARPNESS
V-SHARPNESS
ADVANCED
0
0
PICTURE
POSITION
LANGUAGE
OPTION
Select item with the ▲▼ buttons, and 2)
adjust with the
▲
▼
buttons.
Pressing the ▲▼ buttons on the screen during
z
adjustment switches to the [H-SHARPNESS] or
[V-SHARPNESS] adjustment screen.
H-SHARPNESS
V-SHARPNESS
0
0
The setting range varies according to the selected
z
picture mode and input signal.
[DYNAMIC IRIS]
You can switch automatic adjustment of the lamp and
the lens iris on/off. This augments the video to create
a video expression with sharp contrast between light
and shade.
Switch settings Switch settings
[ON] Automatic adjustment
[OFF] No adjustment
[LIGHT HARMONIZER]
You can optimize the video according to the
brightness and color of the surroundings.
LIGHT HARMONIZER
MODE
MANUAL ADJUST
MANUAL
PICTURE
POSITION
LANGUAGE
OPTION
0
Switch settings Switch settings
[AUTO]
Light harmonizer on (automatic
augmentation). The color sensor
detects the brightness of the
surroundings and automatically
augments the video display.
[MANUAL]
Light harmonizer on (manual
setting). When [MANUAL] is
selected, [MANUAL ADJUST] can
be set using the
▲
▼
buttons
(setting range: 0 to +3).
[OFF] Light harmonizer off.
Note
[AUTO] mode may not function correctly if an object is
z
placed on the color sensor (
page 18) or the projector
is placed in a recess.