Filter
Top Products
[PICTURE] menu
ENGLISH
- 53
Settings
■
[RGB/YC
B
C
R
]
,
[RGB/YP
B
P
R
]
Set this to [AUTO] under normal conditions. If images are
not displayed correctly when this is set to [AUTO], set
either [RGB] or [YC
B
C
R
], [YP
B
P
R
] in accordance with the
input signal.
Switch settings Switch settings
The settings change as follows each time the button
is pressed.
[AUTO] [RGB]
[YP
B
P
R
] [YC
B
C
R
]
When using COMPUTER input
●
When using 480i, 480p, 576i, 576p, or VGA60 input:
z
Select from [AUTO], [RGB], [YC
B
C
R
].
When using a movie based signal input other than
z
described above:
Select from [AUTO], [RGB], [YP
B
P
R
].
When using an HDMI 1/2 input
●
When using a 480p or 576p input:
z
Select from [AUTO], [RGB], [YC
B
C
R
].
When using a movie based signal input other than
z
described above:
Select from [AUTO], [RGB], [YP
B
P
R
].
Note
See “List of compatible signals” for signal details.
z
(
page 86)
In some cases the projector may not operate correctly
z
with some connected devices.
These cannot be selected using COMPONENT input
z
terminals.
[PICTURE MEMORY]
Press the <ENTER> button.
The [PICTURE MEMORY] menu is displayed.
z
PICTURE
POSITION
LANGUAGE
OPTION
PICTURE MEMORY
MEMORY SAVE
MEMORY LOAD
MEMORY DELETE
MEMORY NAME CHANGE
■
[MEMORY SAVE]
Values set (adjustment values) for videos can be
saved as favorites.
PICTURE
POSITION
LANGUAGE
OPTION
MEMORY SAVE
ƭ
MEMORY1
Ƭ
MEMORY2
ƭ
MEMORY3
ƭ
MEMORY4
ƭ
MEMORY5
ƭ
MEMORY6
ƭ
MEMORY7
ƭ
MEMORY8
ƭ
MEMORY9
ƭ
MEMORY10
ƭ
MEMORY11
ƭ
MEMORY12
ƭ
MEMORY13
1/2
: Memory with data already stored.
: No data stored
Press the ▲▼ buttons to select the 1)
number to be saved and press the
<ENTER> button.
The [MEMORY SAVE] conrmation message is
z
displayed.
MEMORY SAVE
SAVE THE ADJUSTED VALUE AS MEMORY 1.
CANCELOK
Select [OK] with the 2)
▲
▼
buttons.
Press the <ENTER> button.3)
[MEMORY NAME INPUT] screen is displayed.
z
MEMORY NAME INPUT
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcde fghijklm
nopqrstuvwxyz
1234567890
!"#$%&'
＊ +-/=?@\^
_`|
~
()<>[]{},.:;
ALL DELETE
SPACE
OK CANCEL
Press the ▲▼◄► buttons to specify the 4)
location of the required character and
press the <ENTER> button.
You can enter up to 16 characters.
z
Select [ALL DELETE] and press the <ENTER>
z
button to erase all input text. If you press the
<DEFAULT> button on the remote control, you can
erase the character currently selected by the cursor
in the input box.