Filter
Top Products
Menu navigation
44 - ENGLISH
Settings
Menu navigation
Navigating through the menu
■
Operating procedure
button
1) Press the <MENU> button on the
remote control or the control panel.
z
The [MAIN MENU] screen is displayed.
(17(5
0$,10(18
3,&785(
326,7,21
$'9$1&('0(18
',63/$</$1*8$*(
',63/$<237,21
352-(&7256(783
7(673$77(51
6,*1$//,67
6(&85,7<
1(7:25.
0(186(/(&7
68%0(18
2) Press
to select the main menu
item.
z
The selected item is highlighted in yellow.
(17(5
0$,10(18
3,&785(
326,7,21
$'9$1&('0(18
',63/$</$1*8$*(
',63/$<237,21
352-(&7256(783
7(673$77(51
6,*1$//,67
6(&85,7<
1(7:25.
0(186(/(&7
68%0(18
3) Press the <ENTER> button.
z
The sub-menu items of the selected main menu
are displayed.
(17(5
326,7,21
6+,)7
'()$8/7
$63(&7
=220
&/2&.3+$6(
.(<6721(
0(186(/(&7
68%0(18
4) Press
to select a sub-menu, and
press
or the <ENTER> button to
change or adjust settings.
z
For some items, press
to display an
individual adjustment screen with a bar scale as
shown in the following diagram.
&2175$67
$'-867
Note
z
Pressing the <MENU> button when the menu
screen is displayed returns to the previous menu.
z
Some items may not be adjusted or used for
certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used
are shown in gray characters, and they cannot be
selected.
z
Some items can be adjusted even if signals are not
input.
z
Individual adjustment screen is cleared
automatically if no operation is performed for
approximately ve seconds.
z
For menu items, see “Main menu” (
page 45) and
“Sub-menu” (
pages 45 to 46).
z
The cursor color depends on the [OSD DESIGN]
(
page 62) settings on the menu. The selected item
is displayed with the yellow cursor by default.
■
Resetting to the factory default
If the <DEFAULT> button on the remote control is
pressed, the values adjusted in the menu items
will be restored to the factory default settings.
button
Press the <DEFAULT> button on the
remote control.
&2175$67
$'-867
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.