Filter
Top Products
[PROJECTOR SETUP] menu
72 - ENGLISH
Settings
[STATUS]
Displays the status of the projector.
1) Press
to select [STATUS].
2) Press the <ENTER> button.
z
The [STATUS] screen is displayed.
3) Press
to switch the pages.
[INPUT]
Displays the input terminal currently
selected.
[SIGNAL NAME] Displays the input signal name.
[SIGNAL
FREQUENCY]
Displays the frequency of the input
signal.
[PROJECTOR
RUNTIME]
Displays the operation times of the
projector.
[LAMP1]
*1
Displays the hours used of lamp 1.
[LAMP2]
*1
Displays the hours used of lamp 2.
[INTAKE AIR
TEMP.]
Displays the status of the air intake
temperature of the projector.
[OPTICS
MODULE
TEMP.]
Displays the status of the internal
temperature of the projector.
[AROUND
LAMP TEMP.]
Displays the status of the
temperature around the lamps of
the projector.
[PROJECTOR
TYPE]
Displays the type of the projector.
[SERIAL
NUMBER]
Displays the serial number of the
projector.
[LAMP UNIT
MODEL NO.]
Displays the model no. of the lamp
unit.
[LAMP1 SERIAL
NUMBER]
Displays the serial number of the
lamp 1.
[LAMP2 SERIAL
NUMBER]
Displays the serial number of the
lamp 2.
[MAIN
VERSION]
Displays the main version of the
rmware of the projector.
[SUB VERSION]
Displays the sub version of the
rmware of the projector.
[NETWORK
VERSION]
Displays the network version of the
projector.
[ON COUNT]
z
[POWER ON TIMES]:
Displays the number of times the
power is turned on.
z
[LAMP1 ON]:
Displays the number of times
lamp 1 has been turned on.
z
[LAMP2 ON]:
Displays the number of times
lamp 2 has been turned on.
z
[SHUTTER]:
Displays the number of times the
shutter function has been used.
[LAMP1]
Displays the details of cumulative
operating time.
[LAMP2]
Displays the details of cumulative
operating time.
[NUMBER
OF ENTRY
SIGNAL]
Displays the number of registered
signals.
[REMOTE2
STATUS]
Displays the control status of the
REMOTE2.
[SIGNAL
INFORMATION]
z
[MEMORY NO.]:
Displays the memory number of
the input signal.
z
[INPUT]:
Displays the input terminal
currently selected.
z
[SIGNAL NAME]:
Displays the input signal name.
z
[SIGNAL FREQUENCY]:
Displays the frequency of the
input signal.
z
[SYNC.STATE]:
Displays the synch polarity of the
input signal.
z
[V.SYNC WIDTH]:
Displays the vertical sync signal
pulse width of the input signal.
z
[SCAN TYPE]:
Displays the scan type of the
input signal.
z
[TOTAL DOTS]:
Displays the total dot count of
the input signal.
z
[DISPLAY DOTS]:
Displays the number of input
signal display dots.
z
[TOTAL LINES]:
Displays the total line count of
the input signal.
z
[DISPLAY LINES]:
Displays the number of input
signal display lines.
z
[SAMPLING]:
Displays the sampling
information of the input signal.
*1: Displays the actual time for the hours used of lamp.
To calculate a rough guide for lamp replacement, convert
as follows:
Lamp replacement time =
Cumulative operating time when [LAMP
POWER] is set to [NORMAL] +
Cumulative operating time when [LAMP
POWER] is set to [ECO] x 2 / 3)
Note
z
The content of status can be sent via E-mail by
pressing the <ENTER> button while displaying the
status.
z
Some items in [SIGNAL INFORMATION] may be
displayed and others not displayed, depending on
the signal being input.