Filter
Top Products
[PICTURE] menu
ENGLISH - 49
Settings
7) Press the <ENTER> button.
z
The [COLOR TEMPERATURE NAME
CHANGE] screen is displayed.
8) Press
to select the text, and
press the <ENTER> button to enter the
text.
9) Press
to select [OK], and
press the <ENTER> button.
z
The name set to color temperature is changed.
Note
z
When a name is changed, display of [USER] on the
menu is also changed.
[WHITE GAIN]
You can adjust the brightness of white areas of the
image.
1) Press
to select [WHITE GAIN].
2) Press
or the <ENTER> button.
z
The [WHITE GAIN] individual adjustment
screen is displayed.
3) Press
to adjust the level.
Operation Adjustment Range
Press
.
Increases the
luminance of white.
Maximum
value +10
Press
.
Image becomes
natural.
Minimum
value 0
[SYSTEM DAYLIGHT VIEW]
You can correct the image to the optimal vividness
even if it is projected under a bright light.
1) Press
to select [SYSTEM
DAYLIGHT VIEW].
2) Press
or the <ENTER> button.
z
The [SYSTEM DAYLIGHT VIEW] individual
adjustment screen is displayed.
3) Press
to switch [SYSTEM
DAYLIGHT VIEW].
z
The setting will change as follows each time
you press the button.
[OFF] (No
correction)
[1] (Low)
[3] (High) [2] (Medium)
[SHARPNESS]
You can adjust the sharpness of the projected image.
1) Press
to select [SHARPNESS].
2) Press
or the <ENTER> button.
z
The [SHARPNESS] individual adjustment
screen is displayed.
3) Press
to adjust the level.
Operation Adjustment Range
Press
.
Contours become
sharper.
0 - 15
Press
.
Contours become
softer.
Note
z
If you press
while the adjustment value is [15],
the value will become [0]. If you press
while the
adjustment value is [0], the value will become [15].
[NOISE REDUCTION]
You can reduce noises when the input image is
degraded and noise is occurring in the image signal.
1) Press
to select [NOISE
REDUCTION].
2) Press
or the <ENTER> button.
z
The [NOISE REDUCTION] individual
adjustment screen is displayed.
3) Press
to switch [NOISE
REDUCTION].
z
The setting will change as follows each time
you press the button.
[1] (Low) [2] (Medium)
[OFF] (No
correction)
[3] (High)
Attention
z
When this is set for an input signal with less noise,
the image may look different from what it originally
was. In such case, set it to [OFF].