Filter
Top Products
[PROJECTOR SETUP] menu
74 - ENGLISH
Settings
[SAVE ALL USER DATA]
Save the various setting values as a backup in the
built-in memory of the projector.
1) Press
to select [SAVE ALL USER
DATA].
2) Press the <ENTER> button.
z
The [SECURITY PASSWORD] screen is
displayed.
3) Enter a security password and press
the <ENTER> button.
4) When the conrmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
z
[PROGRESS] is displayed while saving data.
Note
z
The image setting registered in [USER LOGO] is
not saved.
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in
the built-in memory of the projector.
1) Press
to select [LOAD ALL USER
DATA].
2) Press the <ENTER> button.
z
The [SECURITY PASSWORD] screen is
displayed.
3) Enter a security password and press
the <ENTER> button.
4) When the conrmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
Note
z
The projector will go into the standby status to
reect the setting values when [LOAD ALL USER
DATA] is executed.
[INITIALIZE]
Return various setting values to their factory default
settings.
1) Press
to select [INITIALIZE].
2) Press the <ENTER> button.
z
The [SECURITY PASSWORD] screen is
displayed.
3) Enter a security password and press
the <ENTER> button.
z
The [INITIALIZE] screen is displayed.
4) Press
to select an item to
initialize.
[ALL USER
DATA]
All setting items including [ENTRY
SIGNAL], [NETWORK SETUP],
[E-mail set up], and [USER LOGO]
are returned to factory default
values.
The projector will go into the
standby status to reect the setting
values.
[ENTRY
SIGNAL]
Deletes all the setting values saved
for each input signal.
To delete only a part of a registered
signal, perform the procedure
described in “Deleting a registered
data” (
page 76).
[NETWORK/
E-MAIL]
Returns [NETWORK SETUP] and
[E-mail set up] to factory default
settings.
[LOGO IMAGE]
Deletes the image registered in
[USER LOGO].
5) Press the <ENTER> button.
6) When the conrmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
[SERVICE PASSWORD]
Used by a service person.