Filter
Top Products
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 123
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(ERROR) ===
Projector Type : EZ770
Serial No : SN9250024
----- check system -----
MAIN CPU BUS [ OK ]
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
AROUND LAMP TEMPERATURE [ OK ]
LAMP REMAIN TIME [ OK ]
LAMP STATUS [ OK ]
APERTURE(CONTRAST-SHUTTER) [ OK ]
SHUTTER(MUTE-SHUTTER) [ OK ]
INTAKE AIR TEMP.SENSOR [ OK ]
AROUND LAMP TEMP.SENSOR [ OK ]
BATTERY [ OK ]
AIRFLOW SENSOR [ OK ]
LENS MOUNTER [ OK ]
COVER OPEN [FAILED]
PRESSURE SENSOR [ OK ]
ANGLE SENSOR [ OK ]
FILTER UNIT [ OK ]
AIR FILTER [ OK ]
(Error code00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00)
Intake air temperature : 45 degC / 113 degF
Around lamp temperature : 42 degC / 107 degF
PROJECTOR RUNTIME 2500 H
LAMP ECO 100 H
LAMP NORMAL 200 H
LAMP REMAIN 1900 H
-------- Current status --------
MAIN VERSION 1.00
NETWORK VERSION 1.00
SUB VERSION 1.00
LAMP STATUS LAMP=ON
INPUT SIGNAL HDMI
SIGNAL NAME XGA60
SIGNAL FREQUENCY 65.4kHz / 54.4Hz
REMOTE2 STATUS ENABLE
----- Wired Network configuration -----
DHCP Client OFF
IP address 192.168.0.8
MAC address cc:7e:e8:00:00:00
Tue Jun 04 22:29:33:2013
----- Memo -----
[Change password] page
Click [Change password].
1
2
3
1 [Administrator]
Used to change the setting of the [Administrator].
2 [User]
Used to change the setting of the [User].
3 [Next]
Used to display the screen for changing the password.