Filter
Top Products
Setting-up positions and changing the projection method
The projection method used by the projector can be changed in accordance with the setting-up position.
At the time of shipment from the factory, the projector is set to the “FRONT” projection method, but this can be
changed if required.
Setting procedure
1. Press the MENU button to display the MENU screen.
2. Press the “ ” and
“ ” buttons to select “OPTION”.
3. Press the “<” and “>” buttons to display the OPTION screen.
4. Press the “ ” and
“ ” buttons to select “SET UP”.
5. Press the “<” and “>” buttons to display the SET UP screen.
6. Press the “ ” and
“ ” buttons to select “FRONT/REAR
7.
Press the “<” and “>” buttons to select “FRONT” or “REAR”.
FRONT mounting
(Setting condition at the time of
shipment from the factory.)
REAR mounting
The adjustment screen and the MENU screen can both be cleared by pressing the MENU button.
NOTE:
17