Filter
Top Products
Part VII SD Card (KN2600)
142
QQTG0692
SD Card (KN2600)
5.
Use the FROM SONG buttons to select the
SEQUENCER song number you wish to save.
• The song name to save from is shown below
the FROM SONG button.
6.
Use the PANEL HEADER buttons to specify
ON or OFF.
ON:
The sound and volume settings for each
part are saved as data at the beginning of
the file.
OFF:
This data is not saved.
7.
Use the 1 MEASURE SPACE buttons to
select ON or OFF.
ON:
A one-measure space is added to the
beginning of the file.
OFF:
No space is added.
• When there is various data other than perfor-
mance data stored at the beginning of a file,
the start of playback may be delayed. This can
be avoided by set the 1 MEASURE SPACE to
ON to inserting a before the beginning of the
performance.
• When set to ON, a space is added each time a
file is saved. Therefore, if you have already
saved a file once with the 1 MEASURE
SPACE set to ON, please set it to OFF each
time the file is subsequently saved.
8.
Use the SAVE AS button to select the sound
generator mode (GM/GM2/NX).
9.
Press the SAVE button.
• The SAVE operation begins.
• When the operation has been successfully
completed, “COMPLETED!” is shown on the
display.
• If you attempt to save data to a file number in
which data is currently saved, the display
changes to the confirmation display. Select
the type of data saving.
AT CURSOR LOCATION:
The song is saved to where the cursor is
currently located (overwrite).
AT A NEW LOCATION:
The song is saved as a newly added data
with the last song number.
12_Part VII.fm 142 ページ ２００３年２月５日 水曜日 午後２時４７分