Filter
Top Products
23
Detected issue Displayed information Remarks
Reference page
When a change in
the settings made
by the utility has
been detected
The settings of Wireless Network
connection have been changed.
When a Wireless LAN adapter utility
or any other utilities are active,
stop the operation of such utilities,
then restart the Wireless Manager
ME 5.5.
The wireless LAN adapter utility used by the
computer may have changed the wireless settings.
Close the utility, and then make the connection again
using Easy Wireless Set Up connection.
－
When a setting
error for the
wireless LAN
adapter has been
detected
No response from the wireless LAN
adapter.
• Wireless LAN adapter conditions
• Driver version (Latest)
• Is the wireless LAN adapter effective?
• Is your wireless LAN adapter properly recognized?
• Some wireless LAN adapters may allow Easy
Wireless Set Up connections to function if drivers
are updated.
P.72
When the user
does not have
the administrator
authority
Please execute “Easy Connection”
using the administrator authorization
mode.
If you have logged in as a user that does not have
administrator permission or as [GUEST], you cannot
use easy wireless setup [S-MAP]/network numbers
[1]-[4].
If you must perform Easy Wireless Set Up without
administrator authority, designate [U (user)] as the
network number.
P.25
Issues other than
the above
Please perform the following checks,
when the projector cannot be found.
[Projector setup]
(1) Is the power on for the projector?
(2) Is the Network capability on?
(3) Has the network channel number
correctly been set up?
[Computer setup]
(1) Is Wireless capability on?
(2) Is the Firewall application
causing a network block?
(3) Is wireless enabled?
• Is the power of the projector on?
• Is the network capability of the projector ON?
• Do the network settings of the projector and the
network of Wireless Manager ME 5.5 match?
• Is the wireless capability of the computer ON?
• Is communication being blocked by a Firewall
application installed on the computer?
• Is wireless/wired enabled?
Connecting with wireless LAN (cont.)
The displayed information is as follows.