Filter
Top Products
Part Names and Functions
15
Before You Start
Control Panel
Name Description
Display
When in standby mode, the display shows the current status of the unit as follows:
• The time is shown on the top left corner of the display.
• The scanning mode is shown on the icons on the left side of the display.
• The destination for scanned images is shown in the center of the display.
Mode Key
Press repeatedly to select the scanning mode. The selected mode will be indicated
next to the icons on the left side of the display.
Color: For scanning color images.
B/W: For scanning black and white images.
Preview mode:
Set-up mode:
Returns to the previous screen.
Returns to standby mode.
Set-up Key
Press to change the basic settings of this unit. (See page 24.)
Preview mode:
Set-up mode:
Shows to the lower part.
Goes to the item below.
Advance Key
Press to advance the screen from right to left.
Preview mode:
Set-up mode:
Shows to the right part.
Goes to the next item to the right, or perform the item.
Start/Stop Key
Press to start or stop scanning.
Display
Advance Key
Start/Stop Key
Mode Key
Set-up Key
UB5838C-PJQXC0259ZA_mst.book 15 ページ ２００９年５月２６日 火曜日 午後２時５９分