Filter
Top Products
24
Setting the Unit
The following settings can be made using the control
panel.
Note
• The item “Setting the number of copies” is displayed
at the top of the set-up menu only when the printer is
connected.
It is possible to set the number of copies (1 to 9) when
making multiple copies with a printer.
1
Press the Set-up Key .
• The set-up screen is displayed and the
multiple copy setting for printers is selected.
2
Press the Advance Key ( ) repeatedly to
select the desired number of copies.
3
Press the Mode Key ( ) to return to standby
mode.
Note
• Scanning can be started immediately by
pressing the Start/Stop Key instead of the
Mode Key ( ).
It is possible to select whether the time that an image is
scanned is displayed on the image.
1
Press the Set-up Key .
• The set-up screen is displayed.
Note
• The item “Setting the number of copies” is
displayed at the top of the set-up menu only
when the printer is connected.
2
Press the Set-up Key ( ) repeatedly to select
the following item.
Setting the number of copies
Setting for scanning time
display
Electronic
Board
Electronic
Board
䎓䎗䎒䎓䎔䎒䎕䎓䎓䎜䎃䎔䎕䎝䎖䎗
[On] [Off]
UB5838C-PJQXC0259ZA_mst.book 24 ページ ２００９年５月２６日 火曜日 午後２時５９分