Assembling the unit
41
Installation
■ Assembly
1
Assemble the wall-mounting fixture or optional stand.
• If you are using a wall-mounting fixture, refer to “Wall-Mounting Construction” on page 48.
• If you are using a stand, refer to “Optional Stand Assembly (UE-608035)” on page 53.
2
Remove the joints and the shipping box.
• UB-5838C has 12 joints.
• UB-5338C has 8 joints.
* This is a diagram of the UB-5338C.
UB-5838C has cushioning materials on the upper and lower sides of the center of the unit.
Note
• When handling the screen unit, grasp the side cover on either side of screen. Do not grasp the screen film
surface, as this may scratch it.
• When removing the shipping box, make sure that it does not strike the screen unit. (The screen unit may
fall over.)
• The shipping box, cushioning material, and other packing material will be necessary for repackaging this
unit. Do not throw them away.
• Remove the screen fixing tapes from top down slowly not to damage it.
Power cord
Eraser
Wall-mounting fixture
Operating Instructions
Markers
Washer,
Clamp
Screen unit
Packing
material
USB cable
UB5838C-PJQXC0259ZA_mst.book 41 ページ 2009年5月26日 火曜日 午後2時59分