Panasonic UB-5838C Projector Accessories User Manual


 
29
Help
Daily Care and Maintenance
Always turn off the power switch and unplug the
power plug when cleaning the unit.
Gently wipe the screen film and unit with a water-
dampened cloth that has been thoroughly wrung.
Note
Use a neutral kitchen cleaner diluted with water for
hard-to-clean stains. (If you accidentally write on the
screen with an oil-based marker, wipe with a small
amount of ethyl alcohol.)
Do not use thinner, benzine or cleaners containing
abrasives or surfactants, as this may result in
discoloration or difficulty of erasing.
Do not wipe the screen film with a dry cloth as this
may generate a static charge.
When the erasing surface of the eraser becomes dirty,
hold down the sheet under the top sheet with your
finger and peel off the dirty sheet (white or gray sheet)
by pulling in the direction of the arrow.
Note
Be sure to peel off only one sheet; white or gray sheet
of the eraser.
When the eraser becomes thin, make sure that the
corners of the eraser do not strike the screen during
erasing as this may damage the screen.
Cleaning the Screen and the
Unit
Caring for the Eraser
White or gray sheet
UB5838C-PJQXC0259ZA_mst.book 29 ページ 2009年5月26日 火曜日 午後2時59分