Filter
Top Products
19
ENGLISH
Unpacking
Installing Your Machine
To set up your machine, follow the instructions on the
page provided for each section.
ATTENTION
• Do not plug the main unit's AC Power Cord until
instructed to do so.
Important
1. Unpack the carton and visually check the condition of the
machine and make sure no missing accessories or any
shipping damage before installation. (See page 14)
2. Remove all Shipping Tapes and all Packing Materials.
(See page 20)
3. Load Paper. (See page 21)
4. Install the Toner Cartridge. (See page 23)
5. Connect all Cables and plug the Power Cord. (See page
25)
Note: When moving the machine, do not lift
the machine by grasping parts other
than those specified herein. Doing so
can cause injury.
Note:
When lifting the Main Unit,
grasp by both cavity handles as
illustrated (Right and Left Side).
Do not lift the machine by the
Paper T
ray as it may cause
ray as it may cause
damage and/or bodily injury.