Filter
Top Products
46
Problem Solving
1234
User Codes (U Code)
Jam Error Codes (J Code)
User(U) / Jam(J) Error Codes
NOTE
1. The J## Code indicates the most probable Jam location. If the jam message reappears after the jam is cleared, paper is
most likely jammed at other location(s). Check the Jam Error Codes Table above for other check points and remove all
misfed paper.
2. Make sure that the Jam Error Code disappears after removing the misfed paper.
3. The Jam Error Code will not disappear if the paper is still jammed in the machine. Check again and remove all misfed
paper.
4. When the Machine Error Code (E Code) (for service personnel) appears on the display, reset the machine by first unplug-
ging the power cord of the machine from the wall outlet. Wait for a few seconds and plug the power cord of the machine
in the wall outlet again. If the E Code reappears, contact your local Panasonic Authorized Dealer.
Code Check Points Code Check Points
U06 Right Cover is open. U16 Toner Cartridge is not installed correctly.
U07 Jam Cover is open. U20 ADF Cover is open.
U13 Low Toner or Out of Toner. (See page 40)
Code Check Points Code Check Points
J01,
J02
Remove the jammed paper from the tray(s).
(See page 47)
Check to make sure the Paper Guides are
properly adjusted in the tray(s). (Refer to
the Operating Instructions (For Advanced
Operations) on the provided CD-ROM)
J71,
J72,
J74
J75,
J92,
J93
Remove document(s) in the ADF. (See page
51)
J43,
J44
Remove misfed paper(s) inside the
machine. (See page 49)
U20
U16
U13
U06
U07