Panasonic WJ-GXE500 Webcam User Manual


 
45
[Alarm] page
[Alarm] tab
Refer to page 28 for general information about this tab. Refer to page 13 for further information about the actions.
Setup items Setting values (Underlined: default)
Alarm Terminal 1 *1 *2
Ch1/Ch2/Ch3/Ch4
Off/Alarm input
Terminal 2 *1 *2
Ch1/Ch2/Ch3/Ch4
Off/Alarm input/Alarm output
Terminal 3 *1 *2
Ch1/Ch2/Ch3/Ch4
Off/Alarm input/Alarm output/AUX output
VMD alarm
Command alarm Command alarm *1
Ch1/Ch2/Ch3/Ch4
On/Off
Originating port num-
ber *3
1-65535(Default:8181)
Camera site alarm Ch1 - Ch4
On/Off
Video loss Ch1 - Ch4
On/Off
Alarm image Alarm image FTP transmission *4 *5 *6
On/Off
Directory name (Default:None(blank))
File name (Default:None(blank))
Post alarm Transmission interval
*7
NTSCModel:
0.1fps/0.2fps/0.33fps/0.5fps/1fps
PALModel:
0.08fps/0.17fps/0.28fps/0.42fps/1fps
Number of images
1pic/2pics/3pics/4pics/5pics/6pics/7pics/
8pics/9pics/10pics/20pics/30pics/50pics/
100pics/200pics/300pics/500pics/
1000pics/2000pics/3000pics
Recording duration *8 (Default:100sec.)
Imagecapturesize
QVGA/VGA
Image compression rate upon alarm detection
On/Off
Image quality upon alarm detection
0 Super fine/1 Fine/2/3/4/5 Normal/6/7/8/
9 Low
Alarm output
terminal setup
Alarm output trigger
On/Off
Alarm output type
Latch/Pulse
Trigger output *9
Open/Close
Pulse width 1 - 120 sec.(Default:1sec.)
AUX title AUX (Up to 10 characters) (Default:AUX)
Open (Up to 5 characters) (Default:Open)
Close (Up to 5 characters) (Default:Close)