Filter
Top Products
13
5. Press the SPEED TEAM button of the Center Module
again, the SPEED TEAM mode will be released. The
Order Taker or All-in-One Headset allows the operator to
hear the voice prompt of the "SPEED TEAM OFF".
Notes:
• TALK is prohibited in the speed team mode.
If TALK is attempted with the Order Taker or the All-
in-One Headset, a voice prompt of "Operation not
allowed" is heard from the headset speaker.
• If POS Remote is set for ON, you have to note that
no button operation of the speed team is possible at
the center module.
● Greeter
When the customer approaches the menu board, the voice
message recorded in the Center Module is automatically
output to the outside speaker. The Center Module has two
memories, and you can select either message.
[Method of recording message]
1. Press the Greeter ON/OFF Button of the Center Module.
The Greeter ON/OFF Indicator will light in yellow.
2. Press the Greeter Memory Select Button of Center
Module and select the memory 1 or 2.
3. Press the Greeter Record Button of Center Module. The
Greeter Record Indicator will light in red.
4. Hold down the PAGE button at the PTP setting. Press
the PAGE button at the PAGE LOCK setting. A message
can be recorded for 16 seconds at the maximum.
5. Release the PAGE button at the PTP setting. Press the
PAGE button again at the PAGE LOCK setting.
When recording is complete, one each of the recorded
messages is soon reproduced thereafter.
Notes:
• At the time of shipment from the factory, a message
of “Please pull forward” is recorded in Message 1.
If any recording is performed on Message 1, the
original message will be overridden by the new mes-
sage.
• No recording is possible during Greeter reproduc-
tion.
• It must be noted that the talking sound is also
recorded if TALK operation is attempted during
recording.
[Output setting of Greeter]
1. Press the Greeter ON/OFF Button of the Center Module.
The Greeter ON/OFF Indicator will light in yellow.
2. Press the Greeter Memory Select Button of the Center
Module, and select the memory 1 or 2.
3. Press the Greeter Playback Button of the Center Module,
and set the output level of message to the optimum level
by the Greeter Output Level DOWN/UP Buttons.
4. Set the output destination of the message.
• Output to the auxiliary speaker
Press the Greeter Output Auxiliary Speaker Button of
the Center Module. The Greeter Output Auxiliary
Speaker Indicator will light in green.
• Output to the Headset
Press the Greeter Output Headset Button of the
Center Module. The Greeter Output Headset
Indicator will light in green.
GREETER
START
DELAY
ON
DOWN
UP
1
2
REC
SELECT
VOLUME
DESTINATION
AUX
HEADSET
HEADSET
PLAYBACK
r PAGE button of the Order Taker
or All-in-One Headset
w Greeter Memory Select Button
e Greeter Record Button
q Greeter On/Off Button
GREETER
START
DELAY
ON
DOWN
UP
1
2
REC
SELECT
VOLUME
DESTINATION
AUX
HEADSET
HEADSET
PLAYBACK
e Greeter Output Level Buttons
r Greeter Output Headset Button
e Greeter Playback Button
w Greeter Memory Select Button
r Greeter Output Auxiliary Speaker Button
t Greeter Start Delay Button
q Greeter On/Off Button