Filter
Top Products
29
● Lane setup
In the case of Double-Drive-Thru, one each unit of Center Module is set for Lane A and Lane B, respectively.
Only for the Center Module of Lane B, the Dual Lane is set at ON.
When Lane A or Lane B setup is changed over, the center module will be restarted automatically.
If the [TALK] and [PAGE] indicators begin to blink after restarting, check the connections between both center modules.
Red: Lane A (Generally, this setting is used. This setting is default.)
Green: Lane B
Note: If lane setting is changed, ID registration should be retried.
● POS Remote setup
This setting is made when the POS Remote function is used.
ON (Green): POS Remote Control is enabled. When ON is selected, the following button settings for the Center Module become
invalid:
SPEED TEAM
VEHICLE DETECTOR
BEEP DAY/NIGHT
OUTSIDE SP LEVEL DAY/NIGHT
TALK/PAGE RELEASE
● TX Power setup
The transmission power for the center module is set up.
If there is any anxiety of electric wave interference with neighboring shops, set the transmit power to OFF.
ON (Green): Normal Power (Generally, this setting is used. This setting is default.)
OFF: Reduced Power (25%)