Filter
Top Products
17
Major Operating Controls and Their Functions
q AC Inlet
w Power On/Off Switch
e Through-hole
r Antenna
t Mounting Hole
y Terminal Board Cover
[INSTALLED SYSTEM SETTING]
The following buttons should be used by qualified service
personnel or system installers only.
u PREV/NEXT Button (INSTALL SYSTEM SETTING,
PREV/NEXT)
These buttons select the system setting items.
i Select Button (SEL)
This button selects set value of the system setting items.
o Auxiliary Input On/Off Indicator (Green) (AUX IN)
This indicator is toggled ON when the auxiliary input
sound is provided through the auxiliary speaker.
q w e
t
r
y
t
r
ID REGISTRATION
INSTALLED SYSTEM SETTING
INSTALL SYSTEM SETTING
PREV
ECHO CANCELLER
DNR LEVEL
DUAL LANE
LANE SELECT
POS REMOTE
TX POWER
RED M
AX
YELLOW MD
GREEN LOW
OFF OFF
SEL
AUX
SP
AUX IN
TALK
PAGE
BEEP
NEXT
!5
!6
!7
!8
o
!4
!0
!1
!2
!
3
ui
!0 Talk On/Off Indicator (Green) (TALK)
This indicator is toggled ON when the communication
between store personnel and a customer is provided
through the auxiliary speaker.
!1 Page On/Off Indicator (Green) (PAGE)
This indicator is toggled ON when the communication
among store personnel is provided through the auxiliary
speaker.
!2 Beep On/Off Indicator (Green) (BEEP)
This indicator is toggled ON when a beep is provided
through the auxiliary speaker.
!3 Echo Canceller Effect Level Control Indicator (ECHO
CANCELLER)
The removal rate of the echo canceller, intended to elim-
inate the echo returned from the menu board, is set up.
OFF: Off
LOW: Green
MID: Yellow
HIGH: Red
!4 DNR Effect Level Control Indicator (DNR LEVEL)
The more the noise is reduced, the lower the sound
quality will be. The table of the page 27 relationship
between noise reduction level and quality.
OFF: Off
LOW: Green
MID: Yellow
HIGH: Red
!5 Dual lane On/Off Indicator (Green) (DUAL LANE)
When the TANDEM operation at the double drive-thru,
set to ON.
Installation & Connections