Filter
Top Products
1752 and 1754 SHDSL Router User’s Guide
Restoring your configuration
1. From the System menu, click on Backup/restore.
2. In the Restore Configuration section, click in the Configuration File text box and type the
network path of the file that you wish to restore. If you do not know the path details, click on
and locate the file using the Choose file box.
3. Click on
. The page is refreshed with a Configuration Restored message and
details of the number of bytes uploaded.
Restart Router
This page allows you to restart your router. With the Reset box selected, it has the same
effect as resetting your router by pressing the Reset button on the hardware.
1. From the System menu, click on Restart Router. The following page is displayed:
2. Click on
to reset your router. The Restart page also provides you with the option
of restarting and restoring the factory default settings. Click in the Reset to factory default
settings box to check it, and then click on the
. Read the console status output to
check how the reset is progressing.
3. Once the login and password prompt is displayed at the console, you can login as usual
(with login = admin, password = admin), then refresh the browser that is running EmWeb.
The Status page is displayed when your router has been reset.
Save configuration
To save your current configuration to flash ROM:
1. From the System menu, click on Save configuration. The following page is displayed:
2. Click on
to save your current configuration in the device.
After a short time the configuration is saved and the following confirmation message is
displayed: Saved information model to file //flashfs/im.conf
50 June 2005 1752-A2-GB20-00