Filter
Top Products
1752 and 1754 SHDSL Router User’s Guide
10 and 100,000 seconds. The default value is 300 seconds. If to change the filter age,
input the seconds desired in the filter age field, and then clock on
to submit
your setting.
11. Traffic Class setting which is the status of traffic class mapping. If to set traffic class,
select your option from the drop-down list and click on
to submit your
setting. The following table gives the range of values for each option which can be
specified with this command and a default value.
Option Description Default value
enable Enable the mapping of regenerated
priority to its traffic class.
disable Disable the mapping of regenerated
disable priority to its traffic class.
prioritybased Traffic class mapping would happen only if
traffic class has not been already set.
disable
VLAN configuration
Following figure displays the VLAN settings for the bridge.
The following VLAN information is displayed:
1. VLAN version: IEEE 802.1q version number that this device supports, which is 1.
2. Max VLAN Id: The maximum VLAN Id for a VLAN in the bridge.
3. Max VLANs: The maximum number of VLANs supported in the bridge.
4. Current VLANs: The number of VLANs that are currently existing in the bridge.
Spanning bridge configuration
Following figure displays the spanning bridge settings for the bridge.
66 June 2005 1752-A2-GB20-00