Filter
Top Products
1752 and 1754 SHDSL Router User’s Guide
Option Description
Default value
Priority 1 The regenerated user-priority to which the user
priority with value 1 in the incoming frame should
be mapped.
1
Priority 2 The regenerated user-priority to which the user
priority with value 2 in the incoming frame should
be mapped.
2
Priority 3 The regenerated user-priority to which the user
priority with value 3 in the incoming frame should
be mapped.
3
Priority 4 The regenerated user-priority to which the user
priority with value 4 in the incoming frame should
be mapped.
4
Priority 5 The regenerated user-priority to which the user
priority with value 5 in the incoming frame should
be mapped.
5
Priority 6 The regenerated user-priority to which the user
priority with value 6 in the incoming frame should
be mapped.
6
Priority 7 The regenerated user-priority to which the user
priority with value 7 in the incoming frame should
be mapped.
7
3. Regenerated Priority to traffic class map, as shown in the following figure, specifies the
mapping of regenerated priority to their traffic class values.
The following table gives the range of values for each option which can be specified with this
command and a default value.
Option Description
Default value
Priority 0 The traffic class to which the regenerated priority of
value 0 is mapped.
0
Priority 1 The traffic class to which the regenerated priority of
value 1 is mapped.
1
Priority 2 The traffic class to which the regenerated priority of
value 2 is mapped.
2
Priority 3 The traffic class to which the regenerated priority of
3
1752-A2-GB20-00 June 2005 69