Filter
Top Products
Configuration Options
C-35
3160-A2-GB21-80
March 1999
Table C-9. General Management Configuration Options (5 of 7)
Modem IP Adr:
Next Edit Clear Prev
Modem Port IP Address. Specifies the IP address for the modem port if the Modem Use
configuration option is set to Mgmt.
Edit – Allows you to edit or display the IP address for the modem port.
Clear – Allows you to clear the IP address for the modem port. The IP address is set to
000.000.000.000.
NOTE: This configuration option is available on standalone DSU/CSUs only.
F
Mdm NetMask:
Next Edit Clear Prev
Subnet Mask for the Modem Port. Specifies the Subnet Mask for the modem port if the
Modem Use configuration option is set to Mgmt.
Edit – Allows you to edit and/or display the Subnet Mask for the modem port.
Clear – Allows you to clear the Subnet Mask for the modem port. The Subnet Mask is
set to 000.000.000.000. If the Subnet Mask is 000.000.000.000, the IP protocol creates
a default Subnet Mask based on the class of the IP address (Class A: 255.000.000.000,
Class B: 255.255.000.000, or Class C: 255.255.255.000).
NOTE: This configuration option is available on standalone DSU/CSUs only.
F
Alt Mdm IP Adr:
Next Edit Clear Prev
Alternate Modem Port IP Address. Specifies the alternate IP address for the modem
port if the Modem Use configuration option is set to Mgmt. This IP address is needed if
a call attempt does not complete on the primary alarm/trap phone number (contained in
the alarm directory) and the alternate dial out directory is used to try another phone
number.
Edit – Allows you to edit or display the alternate IP address for the modem port.
Clear – Allows you to clear the alternate IP address for the modem port. The IP address
is set to 000.000.000.000.
NOTE: This configuration option is available on standalone DSU/CSUs only.
F
Alt Mdm NetMask:
Next Edit Clear Prev
Alternate Subnet Mask for the Modem Port. Specifies the alternate Subnet Mask for the
modem port if the Modem Use configuration option is set to Mgmt. This Subnet Mask is
needed if a call attempt does not complete on the primary alarm/trap phone number
(contained in the alarm directory) and the alternate dial-out directory is used to try
another phone number. If this configuration option contains a non-zero Subnet Mask, it
is used as the Subnet Mask for the modem port if a call is completed to the alternate
phone number.
Edit – Allows you to edit and/or display the alternate Subnet Mask for the modem port.
Clear – Allows you to clear the alternate Subnet Mask for the modem port. The Subnet
Mask is set to 000.000.000.000. If the Subnet Mask is 000.000.000.000, the IP protocol
creates a default Subnet Mask based on the class of the IP address (Class A:
255.000.000.000, Class B: 255.255.000.000, or Class C: 255.255.255.000).
NOTE: This configuration option is available on standalone DSU/CSUs only.
F