3-1
3160-A2-GB21-80
March 1999
Operation
3
Overview
This chapter contains information for operating your DSU/CSU. It includes a
description of the front panel and sample procedures for configuring the
DSU/CSU.
NOTE:
Additional information for the carrier-mounted DSU/CSU is located in the
ACCULINK 3151 CSU and 3161 DSU/CSU General Information Guide
and
the
COMSPHERE 3000 Series Carrier Installation Manual
.
Using the Front Panel
The standalone DSU/CSU front panel (Figure 3-1) consists of an LCD, a keypad,
test jacks, and 12 LEDs. The carrier-mounted DSU/CSU faceplate contains test
jacks and 12 LEDs, however, the LCD and keypad are located on the Shared
Diagnostic Control Panel (SDCP) of the 3000 Series Carrier. For more
information about the SDCP, refer to the
COMSPHERE 3000 Series Carrier
Installation Manual
.
NOTE:
You can display a graphical representation of the DSU/CSU front panel on an
attached PC (see Appendix G,
Front Panel Emulation
).