Paradyne 3164 Network Card User Manual


 
Operation
3-39
3160-A2-GB21-80
March 1999
" Procedure
To select the data port:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
key until the Chan selection appears on
the screen.
5. Select Chan.
F1
Edit:DTE
Port NET Chan
F2
F3
6. From the Channel Config screen, press the key to scroll the ports onto
the screen.
7. Select the desired port by pressing its corresponding Function key.
F1
Channel Config:
Prt1 Prt2 Prt3
F2
F3
8. The configuration option for the data port channel allocation destination
appears on the screen. Select NET to assign this port to the network
interface, select DTE to assign this port to the DTE Drop/Insert (DSX-1)
interface, or press the
key and the appropriate Function key to assign
this port to another port.
F1
Assign To:NET
Next NET DTE
F2
F3
9. Press F1 (Next) to display the appropriate configuration options on the
screen. Use one of the following examples, depending on whether you are
assigning by block, ACAMI, or individual channel.