Filter
Top Products
Operation
3-47
3160-A2-GB21-80
March 1999
Configuring for Network Timing
"
Procedure
To configure for network timing:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
key until the Gen selection appears on
the screen.
5. Select Gen.
F1
Edit:
NET Chan Gen
F2
F3
6. Press F1 (Next) to display the next configuration option (Clock Src).
7. Select the master clock source. For network, press F2 (note that network is
also the default).
F1
Clock Src:NET
Next NET DTE
F2
F3
Configuring for External Timing
"
Procedure
To configure 2-port and 4-port DSU/CSUs for external timing:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
key until the Gen selection appears on
the screen.