Filter
Top Products
B-1
8700-A2-GB20-00
April 2000
Standards Compliance for
SNMP Traps
B
SNMP Traps
This section describes the unit’s compliance with SNMP standards and any
special operational features for the SNMP traps supported. The unit supports the
following traps:
H warmStart
H authenticationFailure
H linkUp
H linkDown
H Enterprise-specific traps
ifIndex
The object ifIndex is a variable binding for several traps. The following ifIndex
values are supported for Hotwire 87xx Termination Units:
ifIndex
Description
3–10 DSL Interface Ports 1–8
15–22 DSX-1 or G.703 Interface Ports 1–8
39–46 EOC Management Link Ports 1–8
For a unit defined as an LTU running IP Conservative software or a unit not
running IP conservative software, all traps have at a minimum a variable binding
of the Overloaded ifIndex (OI). The formula for the OI is:
((LTU Slot Number) * 1,000)
+ ifIndex.