Paradyne Hotwire M/SDSL and HDSL2 Termination Units Network Hardware User Manual


 
Index
IN-4
8700-A2-GB20-00
April 2000
P
Passed, self-test result, 7-6
payload rate
EIA-530, A-3
relative to line rate, A-5
Peer IP Address, A-4
performance statistics, 7-11
DSX-1, 7-13
G.703, 7-15
physical environment requirements, D-1
pin assignments
front panel, C-1
Telco 50-pin, C-3
PLD Failure, self-test result, 7-7
Port Status, A-2, A-6, A-8
PORTS LEDs, switching between DSL and DTE, 7-20
power requirements, D-1
Primary Clock Failed, status message, 7-5
Primary Clock Source
DSX-1, A-7
G.703, A-9
Primary System Clock Failed, status message, 7-5
Primary System Clock Reference, A-16
R
related documents, viii
remote send line loopback, 8-7
repeater loopback (RLB), 8-5
reset
ATI, 3-7
AutoRate, 3-8
device, 3-7
slot, 3-7
restore access to ATI, 3-7
S
Save Configuration screen, 3-6
saving configuration option changes, 3-6
to TFTP server, 9-3
screen function keys, 2-7
screens, for user interface, 2-1 2-6
SDSL Mode, A-11
secondary holdover mode, A-14
secondary system clock failure, A-14
Secondary System Clock Reference, A-16
security, 6-1
self-test, results, 7-6
Send and Monitor 511, 8-8
Send Remote Line Loopback, 8-7
Set Cross Connect Mode, A-18
size of card, D-1
SNMP
enable/disable traps, A-30
Enterprise Specific Traps, A-31
general management capabilities, 1-4
limiting management access, 6-5
Link Trap Interfaces, A-31
Link Traps, A-31
NMS IP Address, A-28
NMS Security Options, A-28
Number of Trap Managers, A-30
system entries, 3-2
trap manager IP Address, A-30
trap NMS destination, A-30
traps, B-1
Traps Options, A-29
start-up, ATI, 2-1
status, test messages, 7-7
system
device name fields, 3-2
LEDs, 7-19
System Clock options, A-13
System Options
DSL Mode, A-11
Telco-Initiated Loopback, A-12
Test Duration, A-11
Test Timeout, A-11
T
technical specifications, D-1
Telco-initiated
line loopback, 8-11
loopback, disabling, A-12
payload loopback, 8-12
remote line loopback, 8-12
Telnet session
access, 6-1
access level, A-24
Disconnect Time (Minutes), A-24
enable/disable, A-24
inactivity timeout, A-24
login required, A-24
options, A-23
Session Access Level, A-24
terminal port, direct connection, 2-1