Paradyne Hotwire M/SDSL and HDSL2 Termination Units Network Hardware User Manual


 
26
97-15323
50
1
25
Connector Pin Assignments
C-3
8700-A2-GB20-00
April 2000
Model 8610, 8810, and 8820 DSLAM Telco 50-pin
Connector Pinouts
The Telco 50-pin connectors on the rear of the DSLAM chassis (numbered 13
in 8600 Series DSLAMs and 118 in 8800 Series DSLAMs) provide the 2-wire
loop interface from each DSL port to either the POTS splitter shelf or, if the
loop is not being shared with POTS, then to the Main Distribution Frame
(MDF). The following table lists the pin assignments for each of these
interfaces.
Table C-2. Rear Connector Pinouts
Port
Connector Pins
(Tip, Ring)
Port 1 1, 26
Port 2 2, 27
Port 3 3, 28
Port 4 4, 29
Port 5 5, 30
Port 6 6, 31
Port 7 7, 32
Port 8 8, 33