Filter
Top Products
About the Hotwire 8747, 8777, and 8779 Termination Units
1-4
8700-A2-GB20-00
April 2000
SNMP Management Capabilities
Hotwire 87xx Termination Units support SNMP Version 1, and can be managed
by any industry-standard SNMP manager and accessed using SNMP by external
SNMP managers.
Management Information Base (MIB) Support
For a detailed description of supported MIBs, visit Paradyne’s Web site at
www.paradyne.com. The following MIBs are supported:
H MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with
a network management protocol in TCP/IP internets and provides general
information about the unit. MIB II is backward-compatible with MIB I.
H DS1/E1 MIB (RFC 1406) – Reports the performance status of the DSX-1 or
G.703 interface and supports the features found on the DSX-1 or G.703
Performance Statistics screen.
H Paradyne Enterprise MIB – Supports configuration, status, statistics, and
tests.
SNMP Trap Support
The Hotwire 87xx Termination Unit supports SNMP traps as shown in
Appendix B, Standards Compliance for SNMP Traps.