Filter
Top Products
5-1
7975-A2-GB20-40
December 1998
Testing
5
Accessing the Test Menu
From the Test menu, you can run network tests, data port tests, and a lamp test
for the front panel LEDs.
To access the Test menu, follow this menu selection sequence:
Main Menu
→
Test
main/test Hotwire
Model: 7975
TEST
Network Tests
SYNC Data Port Tests
Device Tests
Abort All Tests
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
Select . . . To . . .
Network Tests Start and stop tests on the network interface.
SYNC Data Port Tests Start and stop tests on the SYNC Port interface.
Device Tests Start and stop lamp test.
Abort All Tests To abort all current tests. Network-initiated tests will not
be affected. An aborted test may continue to run for a
few seconds as the abort command is sent to the
remote end and processed.