![](http://pdfasset.owneriq.net/8/dd/8dd32d69-21e9-467a-998d-13163fd3b2e2/8dd32d69-21e9-467a-998d-13163fd3b2e2-bg3d.png)
Testing
5-7
7975-A2-GB20-40
December 1998
Running SYNC Data Port Tests
To access the SYNC Data Port Tests screen, follow this menu selection
sequence:
Main Menu
→
Test
→
SYNC Data Port Tests
main/test/data Hotwire
Model: 7975
SYNC DATA PORT TESTS
Test Command Status Results
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Local Loopbacks
Data Terminal Loopback: Start Inactive 00:00:00
Data Channel Loopback: Start Inactive 00:00:00
Remote Loopbacks
Send Remote DCLB: Down
Send Inactive 00:00:00
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
Use the Command column to start or stop a test. When the Status column
shows that a test is Inactive, Start is displayed; when a test is Active, Stop is
displayed. Position the cursor at the desired Start or Stop command and press
Enter.
The Results column displays the test duration.