Filter
Top Products
24 VM24 I/O Module
P/N: SIM8-OUT
PARKER COMPUMOTOR
Notch
Fig. 9: I/O Board and Socket
To Insert I/O Boards
1. Insert the I/O board into the socket, as shown in Fig. 9 above, and in
Fig. 10 below. Start the I/O board at an angle of approximately 30°.
2. Firmly press the board into the socket and rotate it forward until it snaps
underneath the metal clips.
3. Make sure both clips have snapped into place to secure the I/O board.
30
1
3
2
Fig. 10: I/O Board Insertion
Caution
Remove power to the VM24 before
removing or inserting boards.