Filter
Top Products
F • Interworking Functions Information Model 3086 G.SHDSL Integrated Access Device User Guide
192 Serial Interface Configuration
Web Based Configuration of the Frame Relay Channel
This section defines the configuration of the Frame Relay Service through the web interface. The Frame Relay
channel is created through the Configuration->WAN link.
Serial Interface Configuration
This section defines the configuration options available for the serial interface on the Model 3086. This infor-
mation could be used to configure the V.35 or X.21 interface available on the unit.
Configuration Variables Available
The following variables are configurable through either the CLI or web interface on the unit.
Clock Mode
Determines the source of timing for the unit.
• Internal: The unit will generate the appropriate clock speed defined by the speed setting of the interface.
• External: The unit will accept the clock from the interface and will use that clock to receive and transmit
data across the interface
Clock Invert Functions: (rxClkInv – receive clock, txClkInv – transmit clock)
Setting this variable will invert the appropriate clock at the interface. This should only be used under direction
of Patton Electronics technical support in order to trouble shoot system installations. Possible settings include
both normal and inverted
Speed
The speed setting function will determine the clock rate that will be used by the interface. Appropriate settings
include any n x 64K speed setting between 64KHz – 2048KHz.