Filter
Top Products
1. Configure IP address 37
SmartNode 4400 Series Getting Started Guide 4 • Getting started with the SmartNode 4400 Series
Note The SmartNode CD-ROM contains a collection of third party software
tools (including TFTP servers and Telnet utilities) to help you configure,
operate and monitor the SmartNode device.
Connect to the RS-232 console port
The RJ-45 Console port is wired as an EIA-561, RS-232 port. Use the included Model 16F-561 adapter and
cable (see figure 17) between the SmartNode’s Console port and a PC or workstation’s RS-232 serial interface.
Activate the terminal emulation program on the PC or workstation that supports the serial interface
(e.g. HyperTerm).
Figure 17. Connecting to the RS-232 Console port
Terminal emulation program settings:
• Asynchronous
• 9600 bps
• No parity
• 8 bit
• 1 stop bit
• No flow control
Console port
Laptop PC
Model 16F-561
adapter and cable
1
0
0
-
2
4
0
V
(
5
0
-
6
0
H
z
)
1
A
M
P
UNIT EQU
IPPED W
ITH DUAL SUPPLIES
DISCON
NECT BOTH
SUPPLIES
BEFORE SER
VICING
E
T
H
0
/
0
C
o
n
s
o
l
e
T
e
l
c
o
P
o
r
t
s
50
R
e
s
e
t
E
T
H
0
/
1