Patton electronic 2635 Network Router User Manual


 
IPLink Series High Speed Routers overview
18
Models 2603, 2621, and 2635 Getting Started Guide
1 • General Information
IPLink Series High Speed Routers overview
The IPLink Series of gateway routers/bridges combine full set of high-speed IP routing features and WAN
access via PPP/IP/FR protocols. All IPLink routers come with an auto-sensing full-duplex 10/100Base-T
Ethernet port, MDI-X cross-over switch, console port, and internal or external power supply. There are three
versions in the IPLink series corresponding to a choice of WAN interface:
The Model 2603 is equipped with an integrated T1/E1 CSU/DSU for connection to full and fractional T1/
E1 services.
The Model 2621 is equipped with DTE/DCE user configurable X.21 interface.
The Model 2635 equipped with a V.35 interface presented on a female DB-25 connector and a cable to
convert to an M34/F.
The IPLink routers provide selectable bridging or routing functionality along with advanced IP features such as
NAT/NAPT, Firewall, and DHCP. A complete set of configurable PPP/IP/FR WAN protocols allow a wide
range of choices when connecting branches via common WAN services. The IPLink routers boast easy installa-
tion offering Console/VT-100, Telnet, HTTP, and SNMP management options.
The following sections describes the IPLink series features and capabilities:
General attributes, see section “General attributes”
Ethernet, see section “Ethernet” on page 19
Protocol support, see section “Protocol support” on page 19
PPP support, see section “PPP Support” on page 19
Management, see section “Management” on page 19
WAN interface, see section “WAN Interfaces” on page 19
Security, see section “Security” on page 20
Front panel status LED see section “Front Panel Status LEDs and Console Port” on page 20
General attributes
Compact, low cost router/bridge
10/100 Ethernet
Comprehensive hardware diagnostics. Easy maintenance and effortless installation.
Plug-and-Play operation for fast and seamless turn-up with pre-configured WAN and LAN options.
Built-in web configuration.
Setup allows for standard IP address and unique method for entering an IP address and mask
without
requiring a console connection. Default IP address of 192.168.1.1/24.
Simple software upgrades obtained via FTP.
Front panel LEDs indicate
Power, WAN,
and
Ethernet LAN
speed and status.
Convenient and standard RJ connectors for
Ethernet
,
Line
, and
Console
.
Standard one-year parts and labor warranty.