Patton electronic 2635 Network Router User Manual


 
IPLink Series High Speed Routers overview 19
Models 2603, 2621, and 2635 Getting Started Guide 1 • General Information
Ethernet
Auto-sensing full-duplex 10Base-T/100Base-TX Ethernet.
Standard RJ-45 connector
Built-in MDI-X cross-over switch.
IEEE 802.1d transparent learning bridge
2 IP address/subnets on Ethernet interface.
Protocol support
Complete internetworking with IP (RFC 741), TCP (RFC 793), UDP (RFC 768), ICMP (RFC 950),
ARP (RFC 826).
IP router with RIP (RFC 1058), RIPv2 (RFC 2453)
Up to 64 static routes.
Built-in ping and traceroute facilities.
Integrated DHCP server (RFC 2131).
DHCP relay agent (RFC 2132/RFC 1542) with 8 individual address pools.
DNS relay with primary and secondary name server selection.
NAT (RFC 3022) with network address port translation (NAPT), MultiNat with 1:1, Many:1,
Many:Many mapping, Port/IP redirection and mapping.
Frame Relay with Annex A/D LMI, RFC 1490 and FRF.12 Fragmentation.
PPP Support
Point-to-point protocol over HDLC
PPPoE (RFC 2516) Client for autonomous network connection. Eliminates the requirement of installing
client software on a local PC and allows sharing of the connection across a LAN.
User configurable PPP PAP (RFC 1661) or CHAP (RFC 1994) authentication.
WAN Interfaces
T1/E1, V.35 or X.21 interfaces
Available with female RJ-48C, dual BNC, DB-25, and DB-15 connectors
User configurable DTE/DCE for X.21
Management
User selectable HDLC or Frame Relay WAN datalink connection.
Web-Based configuration via embedded web server
CLI menu for configuration, management, and diagnostics.
Local/Remote CLI (VT-100 or Telnet).
SNMPv1 (RFC 1157) MIB II (RFC 1213)