Filter
Top Products
The printer does not require any hardware or software signals
from the host system in order to operate.
Flow control characters can be changed
offline through the Printer Configuration mode.
The total number of formats, batches, and graphics is only limited
by the amount of memory available.
Setting Communication Values
To set the communication parameters, follow the instructions
below. For more information on operating the printer, refer to the
Operator’s Handbook.
1.
From the main menu, press d to display Printer
Configuration. Press e . You’ll see
Enter password: _ _ _ _ _ _ _ _
Enter the 1-8 character password and press e .
When you first receive the printer, the
password is MANAGER or ONLINE.
2.
You’ll see the Configuration Options menu.
Select Config Option:
Define Check Digit Schemes
Press d until you see Host Port Configuration. Press e
to select this option. With each parameter, you can enter a
new selection, or just press e to keep the value that is
displayed.
Communication Requirements 2-3