Filter
Top Products
Message Description/Action
No formats
available to print.
You cannot enter Data Entry mode until a
format is defined.
Ribbon problem. The ribbon cassette is depleted or jammed.
The ribbon may be broken. Check the ribbon
and reload or replace it if necessary.
Stacker Fault. The stacker is full or the stacker track is
jammed. Empty the stacker before trying to
print again.
Supply problem. There is a problem with the feed mechanism.
Reload the supply if necessary.
The 9474 will also display this
message if the backing paper takup reel is
full, the printer is out of stock, or the stock is
the incorrect size for the format that was
loaded.
Communication Errors
The following errors are caused by communication problems in
the printer.
Message Description/Action
All comm
channels busy.
Software Error. Call Monarch Service.
Invalid comm
channel.
Software Error. Call Monarch Service.
Invalid file type. Software Error. Call Monarch Service.
Receive buffer full. The host did not stop transmission after it
received an XOFF character or after DTR
went inactive. Check communication setup at
the host.
6-8 Error Messages